Author: Michele

Bauma 2019

Edition of the World’s Leading Trade Fair for Construction Machinery, Building Material Machines, Mining Machines, Construction Vehicles and Construction Equipment

08 | 14 April – Munich

The Uk Concrete Show 2019

The whole of the concrete Industry. The Uk concrete show, the only UK event dedicated exclusively to the concrete industry.

20 | 21 MArch 2019 – The NEC, Birmingham

Marmo + MAC 2018

The biggest Stone + Design + Technology trade fair

26 | 29 SEPT 2018 – Verona Italy

Interclean 2018

Everything a cleaner world needs. Interclean is the virtual leading Cleaning and Hygiene Event

15 | 18 MAY 2018 – Amsterdam

Marmo + MAC 2017

The biggest Stone + Design + Technology trade fair

27 | 30 SEPT 2017 – Verona Italy

Middle East Stone 2017

International Stone, Marble and Ceramics Show

22 | 25 MAY 2017 – Dubai World Centre

KS slurry dryer

Super absorbent polymer designed by Klinsystem to absorb and retain fluids in order to reduce the volume and simplify transport.It is a soluble polymer with a white granular consistency in its dry form.

When it comes in contact with the sludge, it forms a gel with excellent mechanical stability that holds these liquids, even under stress, since absorption is based on a physical-chemical process. The performance of superabsorbent polymers is related to the amount of sediment present in the liquids to be absorbed.

USE: Spread on slurry and sludges and wait for reaction. APPLICATION: Concrete grinding, Concrete and stones saw cutting and drilling, Concrete areas to rinse Natural stone grinding and restoration. Available in 20 Kg.

Shine blue

Crystallizing cream for granite and gres. Increases wear resistance, powerful protection against dust, acid/alkalin, washing, scratches and stain, and excellent self-cleaning properties. Thanks to the thermal force of the crystallization, SHINE BLU penetrate into the molecular gaps of the floor and then solidify into high-strength, rigid transparent protective layer and form a crystal shield on the surface of the stone. SHINE BLU is a polishing cream specifically made for polishing granite and gres. Available in 1 Kg.

KS slurry dryer

Super absorbent polymer designed by Klinsystem to absorb and retain fluids in order to reduce the volume and simplify transport.

It is a soluble polymer with a white granular consistency in its dry form. When it comes in contact with the sludge, it forms a gel with excellent mechanical stability that holds these liquids, even under stress, since absorption is based on a physical-chemical process. The performance of superabsorbent polymers is related to the amount of sediment present in the liquids to be absorbed.

USE: Spread on slurry and sludges and wait for reaction. APPLICATION: Concrete grinding, Concrete and stones saw cutting and drilling, Concrete areas to rinse Natural stone grinding and restoration. Available in 20 Kg.

Klinsoap

Shining soap for marble and natural stone. Improves and protects the surface, high quality combination cleaner that simultaneously forms a water insoluble and dirt repellant barrier. Dilute by 0.5 liters every 10 liters of water for daily cleaning, and increase to 1-2 liters per 10 liters for added sealing impregnation effect.

Good as final cleaning after polishing procedure of stone, concrete, terrazzo, timber and even vinyl flooring. Available in BOX4×5 Lt

KS Slurry Dryer

Super absorbent polymer designed by Klinsystem to absorb and retain fluids in order to reduce the volume and simplify transport.It is a soluble polymer with a white granular consistency in its dry form.

When it comes in contact with the sludge, it forms a gel with excellent mechanical stability that holds these liquids, even under stress, since absorption is based on a physical-chemical process. The performance of superabsorbent polymers is related to the amount of sediment present in the liquids to be absorbed.

USE: Spread on slurry and sludges and wait for reaction. APPLICATION: Concrete grinding, Concrete and stones saw cutting and drilling, Concrete areas to rinse Natural stone grinding and restoration. Available in 20 Kg.

Kristal & Lux

Crystallizer cream specially formulated for vitrifying surfaces of marble and terrazzo. It provides waterproofing and hardness for high traffic resistance. No-slippery, high and long lasting protection and not marks footprints. Mirror Shine effect.

Can be used for periodical maintenance of floors already crystallized. Instructions: spray a little quantity of product, spread the product uniformly with a single disc machine fitted with a steel wool pad and work until the product gets completely dry. Available in Box 3×5 Lt.

Klinsoap

Shining soap for marble and natural stone. Improves and protects the surface, high quality combination cleaner that simultaneously forms a water insoluble and dirt repellant barrier.

Dilute by 0.5 liters every 10 liters of water for daily cleaning, and increase to 1-2 liters per 10 liters for added sealing impregnation effect. Good as final cleaning after polishing procedure of stone, concrete, terrazzo, timber and even vinyl flooring. Available in BOX4×5 Lt

Shine green

Polishing cream for marbles, artificial marbles and agglomerates. SHINE GREEN increases wear resistance, powerful protection against dust, acid/alkalin, washing, scratches and stain, and excellent self-cleaning properties.

Thanks to the thermal force of the crystallization, SHINE GREEN penetrate into the molecular gaps of the floor and then solidify into high-strength, rigid transparent protective layer and form a crystal shield on the surface of the stone. Available in 1 Kg.

Polish powder KS80

High quality yellow polish powder for marble and terrazzo polishing after grinding steps. Can be used for daily maintenance of polishing marble, terrazzo, porcelain and glass surfaces. It is fine abrasive adapt to remove fungus, soap scum build-up and embedded stains in grouting immediately.

Suitable for use in big areas, hotels, shopping mall, on all type of natural stone surfaces. Available in 5 Kg or 20 Kg.

Polish powder KS85

High quality yellow polish powder for marble and terrazzo polishing after grinding steps. Can be used for daily maintenance of polishing marble, terrazzo, porcelain and glass surfaces.

It is fine abrasive adapt to remove fungus, soap scum build-up and embedded stains in grouting immediately. Suitable for use in big areas, hotels, shopping mall, on all type of natural stone surfaces. Available in 5 Kg or 20 Kg.

Polish powder KS92

High quality polish powder for standard marbles and limestone. Excellent solution for daily cleaning of natural surfaces. It is fine abrasive adapt to remove fungus, soap scum buildup and embedded stains in grouting immediately.

Suitable for use in big areas, hotels, shopping mall, on all type of natural stone surfaces. Available in 5 Kg or 20 Kg.

Polish powder KSMT

High quality polish powder for soft and abrasive marbles like Carrara, limestone etc. KSMT very good quality Polish Powder, excellent solution for daily cleaning of hard surfaces.

Fine abrasive, can be use to remove fungus, soap scum build-up and embedded stains in grouting immediately. Suitable for use in big areas, hotels, shopping mall, on all type of natural stone surfaces. Available in 5 Kg or 20 Kg.

KS slurry dryer

Bicomponent resin ideal to seal and grouting large and micro holes and cracks on concrete floors. It can be mixed with grinding dust up to

Super absorbent polymer designed by Klinsystem to absorb and retain fluids in order to reduce the volume and simplify transport.It is a soluble polymer with a white granular consistency in its dry form.

When it comes in contact with the sludge, it forms a gel with excellent mechanical stability that holds these liquids, even under stress, since absorption is based on a physical-chemical process. The performance of superabsorbent polymers is related to the amount of sediment present in the liquids to be absorbed.

USE: Spread on slurry and sludges and wait for reaction. APPLICATION: Concrete grinding, Concrete and stones saw cutting and drilling, Concrete areas to rinse Natural stone grinding and restoration.

Concrete oil cleaner

Biphasic alkaline detergent. Industrial detergent specifically designed for rapid and deep cleaning of industrial surfaces in sludge concrete and heavy dirt.

Super-concentrated detergent suitable to solubilize and to eliminate quickly various types of dirt. High penetrating, emollient and emulsifying power.

Concrete Oil Cleaner also removes the most tenacious dirt, guaranteeing deeper cleaning. Concrete Oil Cleaner can be used for extraordinary cleaning on various industrial surfaces such as cement and synthetic coatings. Available in 12 Lt.

Concrete color dye (Powder)

Concentrate colour powder to be dilute in 4 liters of Acetone. The color gradation may vary according to the composition of the concrete, so we recommend to do a preliminary color test. Application: all concrete floors. Available in 50 gr (quantity for 4 Lt of Acetone).

Solvent based dyes are the most commonly used products for coloring concrete floors.


Micronized dye particles are catalyzed in acetone, which in turn penetrate into the concrete surface. Thanks to the very fine pigments, the color penetrates deep into the concrete surface. The more porous the concrete, the deeper the dye color will saturate.
The use of dyes opens a wide spectrum of vivid colors not available with iron oxide or acid stains. It is important to note that these dyes are not UV stable and should only be used indoors.

The dyes are non-reactive and moisture can affect the longevity of the color, therefore it is highly recommended that moisture tests should be carried out and a topical sealer like Concrete Guard Lithium or Concrete Gloss Finish should be used for additional protection.

Concrete oil stop

Water-based impregnating agent, ideal to protect all concrete surfaces. Excellent repellency to oily substances and water.

Anti stain product, non-flammable, easy to use, doesn’t make films and lets the surfaces breathe. Increase the life of the floor and keep the aesthetic of the surface. Reduces the damage caused by freezing / thawing and salt efflorescence. Can be applied on the floor after last grinding step.

Apply on a dry and clean surface. Spray the product on the floor and spread with a micro fiber cloth. Wait 24 hours before applying the final sealer (Concrete Guard Lithium). Available in 5 Lt.

Concrete Gloss Finish (Lithium based)

Concrete sealer, oil repellent treatment, once applied and burnished it makes a very hard film for maximum protection against wear due to heavy equipment and traffic.

Extremely durable, perfect protection against stain formation and suitable for extreme requirements in food service and retail stores. Available in 1 Lt.

Concrete Gloss Primer (Lithium based)

Concrete Gloss Primer is the perfect bonding base before the application of Concrete Gloss Finish. The combination of the 2 products protects the surface against wear due to heavy equipment and traffic, stain and UV degradation. Recommended level of grinding/polishing before application is 200-400 grit or higher.

The floor must be cleaned and dry. Available in 1 Lt.

Concrete Guard Lithium

High gloss, oil-repellent treatment, stain and wear resistant concrete sealer. Once applied and burnished it makes a very hard film for maximum protection. It can be applied directly on the floor by using microfiber cloth.

After application we suggest to polishing the surface with high speed machine. Suitable for industrial areas with heavy traffic. Available in 5 Lt or 25 Lt.

Concrete KS Shield

Penetrating stain and water repellent for polished concrete.

Special formulation which makes the surface water repellent while leaving its aesthetic characteristics and substrate transpirability unchanged.

Invisible protection and adds in durability and resistance against wear due to weather and many other agents. It prevents fluorescence and mold build-ups.

It does not create a film, but penetrates into the concrete covering the inner surface of each pore. Available in 5 Lt.

Concrete Hardnerconcrete Hardner Lithium (Lithium Densifier)

Concrete Hardner Lithium improves the hardness and quality of new and existing concrete floors. Easy-to-use water-based solution.

When sprayed on new or existing concrete, it penetrates up to 7 mm where it reacts with free calcium to form insoluble calcium silica hydrate, which makes concrete water, stain and abrasion resistant for easier maintenance and longer life.

It is also suitable for concrete polishing procedures and helps prolong the life of polished finishes.

Available in 5 Lt or 25 Lt.

Pavelux For Granite and Gres

Synthetic tools for removing mastic and grinding abrasive floors where resin tools have not long life.

Technical data

Suitable forGranite and gres
Diameter100 mm – 4″
Grit60 – 120 – 220 – 400 – 800 – 1800 – 3500
ConnectionVelcro connection or Plastic support
We suggest to use PAVELUX GRANITE 4 and 5 to close all the micro-porosity of the granite. Continue polishing with resin tools Grit 400. 

Nato Stone Polishing pads

Resin bond diamond tools for grinding, polishing and restoration of marble and natural stone. Wide channels and patented design allow to work on a cleaner surface, ensuring a quality polish.

NATO pads feature a thick 12mm layer of resin and diamonds for extra long life.

High quality, long lasting resin bond, can be used with all floor grinding machines with velcro connection. We recommend a minimum of 3 discs per head for optimum performance.

Only WET use.

Technical data

Grit30 – 50 – 100 – 200 – 400 – 600 – 800 – 1500 – 3000
Size80 mm / 3″
Thickness12 mm

Spiral Polishing pads

The undisputed solution for polishing natural stone floors.

Both spiral patterns enable water to efficiently dispose of slurry, keeping the working surface clean.

The standard spiral pattern is designed for medium to softer stones, such as marble, travertine, onyx and limestone.

The wide channel pattern with a larger footprint is more appropriate for harder stone such as granite. Both versions should be used wet only. Velcro connection.

Technical data

Grit30 – 50 – 120 – 220 – 400 – 800 – 1800 – 3500 – 8500
Size80 mm / 3″
Thickness6 mm

Floor Pads

Floor pads for polishing and daily cleaning.

  • WHITE FLOOR PAD For polishing floors.
  • RED FLOOR PAD For spray cleaning.
  • BLACK FLOOR PAD For wet stripping hard floor.
  • GREEN FLOOR PAD For wet stripping on linoleum, rubber. 
CLICK ON THE IMAGE TO VIEW IN DETAIL
Floor Pads
Floor Pads Green
Floor Pads Red
Floor Pads White
Floor Pads Black

Technical data

Diameter
100mm/4″ – 150mm/6″ – 240mm/9,5″ – 280mm/11″ – 330mm/13″ – 430mm/17″ – 540mm/21″ – 660mm/26″ – 710mm/28″

Helix Plus Diamond floor pads

REVOLUTIONARY DIAMOND FLOOR PADS SUITABLE TO REMOVE SCRATCHES AND TO RESTORE THE GLOSS OF THE FLOORS.

Transforms your dull, worn floors into clean, glossy and brightly polished floors. Easy to use with standard single disc machine or with Orbital machines to remove scratches, cleaning and polishing the floors.HELIX PLUS Diamond Floor Pads are an efficient solution for floor grinding, floor restoration and floor maintenance to provide a very good results on Concrete, Marble, Terrazzo, Ceramic, Klinker floors, Natural stone, PVC, Rubber, Vinyl, Epoxy and Wooden floors.

Technical data

Grit50 – 100 – 200 – 400 – 800 – 1500 – 3500
Sizes240mm/9,5″ – 430mm/17″

  • HELIX PLUS 000 Grit 50: Aggressive Grit. Suitable to remove deep marks or scratches on marble, concrete and natural stones.
  • HELIX PLUS 00 Grit 100: Suitable to remove deep marks or scratches on concrete, marble and natural stones.
  • HELIX PLUS 0 Grit 200: Suitable to remove light marks or light scratches on marble, concrete and natural stones.
  • HELIX PLUS 1 Grit 400: To use after HELIX PLUS 0 for a matt finish. It also remove light scratches on concrete, marble and natural stones.
  • HELIX PLUS 2 Grit 800: To use after HELIX PLUS 1 for a honed finish.
  • HELIX PLUS 3 Grit 1500: To use after HELIX PLUS 2 for a semi gloss finish.
  • HELIX PLUS 4 Grit 3500: To use after HELIX PLUS 3 for a gloss finish: Grit 4 is ideal for Buffing.

HELIX PLUS can be used Wet or Dry. Only water! HELIX PLUS requires no chemical or wax. Cleaning and polishing using just water reduces the environmental impact and eliminates additional costs.

Using HELIX PLUS instead of the traditional Floor Pads, allows to restore and maintain the floor always shine during the normal cleaning. For ordinary use, floor maintenance in large areas and also to polish old floors with Single disc machines, Orbital Machines and auto-scrubbers, getting results comparable to professional Floor Care Machines.

Using HELIX PLUS with a planetary grinding machines is possible to polish and re-polish all kind of floors. Suitable to remove deep scratches and restore acid, wine, cola stained, marble or terrazzo floors. HELIX PLUS are also suitable for grinding and polishing concrete floors.

Concrete Hardner

(Sodium / Potassium densifier)

Concrete Hardner KS10 improves the hardness and quality of new and existing concrete floors. Easy-to-use water-based solution.

When sprayed on new or existing concrete, it penetrates up to 4 mm where it reacts with free calcium to form insoluble calcium silica hydrate, which makes concrete water, stain and abrasion resistant for easier maintenance and longer life.

It is also suitable for concrete polishing procedures and helps prolong the life of polished finishes. Available in 5 Lt or 25 Lt.

Helix Diamond floor pads

HELIX Diamond pads are an different solution for floor restoration and floor maintenance and provides very good results on polished concrete, natural stone, terrazzo, resin floors, etc.

Technical data

Grit60 – 120 – 220 – 400 – 800 – 1800 – 3500
Sizes240mm/9,5″ – 330mm/13″ – 430mm/17″ – 510mm/20″

  • HELIX 000 Grit 60: Aggressive Grit. Suitable to remove deep marks or scratches on marble, concrete, natural stones and terrazzo.
  • HELIX 00 Grit 120: Suitable to remove deep marks or scratches on concrete, marble and natural stones.
  • HELIX 0 Grit 220: Suitable to remove light marks or light scratches on marble, concrete and natural stones.
  • HELIX 1 Grit 400: To use after HELIX 0 for a Matt finish. It also remove light scratches on concrete, marble and natural stones.
  • HELIX 2 Grit 800: To use after HELIX 1 for a honed finish.
  • HELIX 3 Grit 1800: To use after HELIX 2 for a semi gloss finish.
  • HELIX 4 Grit 3500*: To use after HELIX 3 for a gloss finish: Grit 4 is ideal for Buffing.

*Available also HELIX 5 Grit 5000 and HELIX 6 Grit 12000 Lux


Marble and Terrazzo polishing system

Start grinding the floor with Helix grit 1 and 2 according to the condition of the floor, then proceed with HELIX grit 3 and 4. Use PADLUX floor pad and KS POLISH POWDER with little quantity of water to massage the floor until get the shine.

Old resin and epoxy coated floor restoration

High speed polishing machine like KP 43 DS DUAL SPEED is recommended. Start scrubbing the floor with HELIX grit 0 or 1 according to the condition of the floor then proceed with HELIX grit 2 and 3. It is always suggested to work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq. Polish with HELIX grit 4 working with little quantity of water at the higher speed of 400 rpm.

Matt finish ceramic, klinker and tiles heavy duty cleaning

(not for polished tiles).
Start scrubbing the floor with HELIX grit 2 according to the condition of the floor, work at low speed of 160 rpm. Work wet with little quantity of water until old marks and dirty will disappear. Proceed with HELIX grit 4 and little quantity of water at low speed. Polish with HELIX grit 5 working at high speed 400 rpm.

Linoleum, PVC, Vinyl floor restoration

(High speed polishing machine is recommended)
Start scrubbing the floor with HELIX grit 1 or 2 according to the condition of the floor, then proceed with HELIX grit 3. Work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq. Then polish with HELIX grit 4 and little quantity of water at the higher speed of 400 rpm.

Shinepro Maintenance Diamond floor pads

Efficient and versatile solution for floor restoration and maintenance. Outstanding results on polished concrete, natural stone, terrazzo, VCT, resin floors and overlays. ShinePro pads can be used dry on high speed burnishers, and wet on auto scrubbers, buffers, swing machines, grinders and other floor machines. Always rinse the pads with water after use. When the pad color is gone, it is time to replace the pads. Always make sure you attach the pads with the color side down (the side with printed text should be up). SHINEPRO MAINTENANCE Grit BUFF (Dry use) is ideal during Trowel Shine System after using Concrete Guard Lithium.

Technical data

Grit220 – 400 – 800 – 1800 – BUFF
Sizes230mm/9″ – 330mm/13″ – 356mm/14″ – 430mm/17″ – 510mm/20″ – 685mm/27″

Shinepro Screen Flexible Electroplated screen

ShinePro Screen flexible Electroplated Screens ideal for aggressive cleaning, spot repair and floor restoration. Screens Grit 220 and 400 are very aggressive and designed for hard floors. The Grit 600 is ideal for a satin smooth surface effect. Suitable for compact grinders for smaller areas, burnisher or autoscrubbers up to 350 rpm for large areas. The ShinePro Screens system offers out standing results and cost savings, extending the life of daily maintenance, reducing working times and consumption of chemicals.

Technical data

Grit220 – 400 – 600
Sizes330mm/13″ – 356mm/14″ – 430mm/17″ – 510mm/20″ – 540mm/21″ – 685mm/27″

Shinepro Plus Diamond floor pads

SHINE PRO PLUS polishing pads are an efficient and versatile solution for floor restoration and maintenance and provide out standing results on polished concrete, natural stone, terrazzo, resin floors, etc.

Technical data

Grit50 – 120 – 220 – 400 – 800 – 1800 – 3500
Sizes125mm/5″ – 230mm/9″ – 330mm/13″ – 356mm/14″ – 430mm/17″ – 510mm/20″

REVOLUTIONARY DIAMOND FLOOR PADS SUITABLE TO REMOVE SCRATCHES AND TO RESTORE THE GLOSS OF THE FLOORS.

Transforms your dull, worn floors into clean, glossy and brightly polished floors. Easy to use with standard single disc machine or with Orbital machines to remove scratches, cleaning and polishing the floors. SHINE PRO PLUS Diamond Floor Pads are an efficient solution for floor grinding, floor restoration and floor maintenance to provide a very good results on Concrete, Marble, Terrazzo, Ceramic, Klinker floors, Natural stone, PVC, Rubber, Vinyl; Epoxy and Wooden floors.

SHINE PRO PLUS can be used Wet or Dry. Only water! SHINE PRO PLUS requires no chemical or wax. Cleaning and polishing using just water reduces the environmental impact and eliminates additional costs.

Hypershine Extra

Transforms your dull floors into clean and polished floors. Easy to use with standard single disc machine or with Orbital machines to remove scratches, cleaning and polishing the floors. HYPERSHINE EXTRA is available 7 different grits, can be used for Marble, Terrazzo, Ceramic, Klinker, Natural stone, PVC, Rubber, Vinyl, Epoxy and Wooden floors.HYPERSHINE EXTRA can be used Wet or Dry with any type of floor care machines and auto-scrubber. Using HYPERSHINE EXTRA instead of the traditional Floor Pads, allows to restore and keep the floor shine during the normal cleaning. Only water! HYPERCHINE EXTRA requires no chemical or wax. Using just water reduces the environment and eliminates additional costs.

Technical data

Grit60 – 120 – 220 – 400 – 800 – 1800 – BUFF
Sizes240mm/9,5″ – 330mm/13″ – 430mm/17″ – 510mm/20″

  • HYPERSHINE EXTRA 000 Grit 60: Aggressive Grit. Suitable to remove deep marks or scratches on marble, concrete, natural stones.
  • HYPERSHINE EXTRA 00 Grit 120: Suitable to remove deep marks or scratches on concrete, marble and natural stones.
  • HYPERSHINE EXTRA 0 Grit 220: Suitable to remove light marks or light scratches on marble, concrete and natural stones.
  • HYPERSHINE EXTRA 1 Grit 400: To use after HYPERSHINE EXTRA 0 for a matt finish. It also remove light scratches on concrete, marble and natural stones.
  • HYPERSHINE EXTRA 2 Grit 800: To use after HYPERSHINE EXTRA 1 for a honed finish.
  • HYPERSHINE EXTRA 3 Grit 1800: To use after HYPERSHINE EXTRA 2 for a semi gloss finish.
  • HYPERSHINE EXTRA 4 Grit BUFF*: To use after HYPERSHINE EXTRA 3 for a gloss finish: Grit 4 is ideal for Buffing.

*Available also HYPERSHINE EXTRA 5 Grit 5000 and HYPERSHINE EXTRA 6 Grit 12000 Lux


Old wood coating floor restoration

(KP 43 DS DUAL SPEED is recommended)
Start grinding the floor with HYPERSHINE EXTRA grit 1 or 2 according the condition of the floor then proceed with HYPERSHINE EXTRA grit 3 and 4. Work dry at medium speed of 200 rpm until old marks and imperfection disappear.

Matt finish ceramic, klinker and glazed tiles heavy duty cleaning

(not for polished tiles).
Start scrubbing the floor with HYPERSHINE EXTRA grit 2 according to the condition of the floor, work at low speed of 160 rpm. Work wet with little quantity of water until old marks and dirty will disappear. Proceed with HYPERSHINE EXTRA grit 4 and little quantity of water at low speed. Polish with HYPERSHINE EXTRA grit 5 working at high speed 400 rpm.

Old resin and epoxy coated floor restoration

High speed polishing machine like KP 43 DS DUAL SPEED is recommended. Start scrubbing the floor with HYPERSHINE EXTRA grit 0 or 1 according to the condition of the floor then proceed with HYPERSHINE EXTRA grit 2 and 3. It is always suggested to work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq. Polish with HYPERSHINE EXTRA grit 4 working with little quantity of water at the higher speed of 400 rpm.

Marble and Terrazzo polishing system

Start grinding the floor with HYPERSHINE EXTRA grit 1 and 2 according to the condition of the floor, then proceed with HYPERSHINE EXTRA grit 3 and 4. Use PADLUX floor pad and KS POLISH POWDER with little quantity of water to massage the floor until get the shine.

Linoleum, PVC, Vinyl floor restoration

(High speed polishing machine is recommended)
Start scrubbing the floor with HYPERSHINE EXTRA grit 1 or 2 according to the condition of the floor, then proceed with HYPERSHINE EXTRA grit 3. Work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq. Then polish with HYPERSHINE EXTRA grit 4 and little quantity of water at the higher speed of 400 rpm.

Hypershine Stone

REVOLUTIONARY DIAMOND FLOOR PADS SUITABLE TO REMOVE SCRATCHES AND TO RESTORE THE GLOSS ON MARBLE AND TERRAZZO FLOORS.

Transforms your dull, worn floors into clean, glossy and brightly polished floors. Easy to use with standard single disc machine or with Orbital machines to remove scratches, cleaning and polishing the floors.

HYPERSHINE STONE can be used with single disc machines to re-polish Marble and Terrazzo floors, getting results comparable to professional Floor Care Machines. Suitable to remove deep scratches and restore acid, wine, cola stained-floors. HYPERSHINE STONE can be used with single disc machines or with Orbital machines to re-polishing Marble and Terrazzo floors.

Suitable to remove deep scratches and to restore scratched and stained-floors. Start grinding the floor with HYPERSHINE STONE 00 or 0 in according to the condition of the floor, then proceed with HYPERSHINE STONE 1 and 2 (work with little quantity of water).Polish the floor with Polish Powder and Padlux Floor Pad.

Technical data

Grit60 – 120 – 220 – 400 – 800 – 1800 – BUFF
Sizes330mm/13″ – 430mm/17″ – 510mm/20″ 

Marble and Terrazzo Grinding and Polishing

Using standard Single discs machine or with an Orbital machine, start grinding the floor with HYPERSHINE STONE 1 or 2 in according to the condition of the floor, then proceed with HYPERSHINE STONE 3 (work with little quantity of water). Polish the floor with Polish Powder and Padlux Floor Pad, working with little quantity of water.

ATOM PLUS

Essential professional range; practicality and economy are the elements that distinguish it. A Dry version: ATOM and a Wet and Dry version: ATOM PLUS, guarantee excellent value for money.

Technical data

ModelATOM PLUS
TypeWet/Dry
Motor – Stages n.1 -1
Rated power1200/1350 W
Power230 V – 50 Hz
Air flow120 cm/h
Capacity20 Lt
Gross weight6 Kg

Kit Wet/Dry

Head with filter.

Pavelux for Marble

Synthetic tools for removing mastic and grinding abrasive floors where resin tools have not long life.

Technical data

Suitable forMarble
Diameter100 mm – 4″
Grit60 – 120 – 220 – 400 – 800 – 1800 – 3500
ConnectionVelcro connection or Plastic support
We suggest to use PAVELUX MARBLE 3 and 4 in place of resin tool Grit 60 and 120.

ATOM

Essential professional range; practicality and economy are the elements that distinguish it. A Dry version: ATOM and a Wet and Dry version: ATOM PLUS, guarantee excellent value for money.

Technical data

ModelATOM
TypeDry
Motor – Stages n.1 -1
Rated power700/900 W
Power230 V – 50 Hz
Air flow102 cm/h
Capacity10 Lt
Gross weight4,2 Kg

Kit Dry

DRYVER 15 RE

Vacuum cleaners with excellent performances; powerful when situations require it, delicate but efficient when discretion and functionality are required. A series of technical devices make them unique on the market, while the series filtration system returns pure air to the environment.

Technical data

ModelDRYVER 15 RE
TypeDry
Motor n.1
Max power700/800 W
Voltage – Frequency230/240 V – 50/60 Hz
Air flow36 l/s
Vacuum210 mBar
Capacity15 Lt
Gross weight10 Kg

Kit Dry Ø 32 mm

DRYVER 15 R

Vacuum cleaners with excellent performances; powerful when situations require it, delicate but efficient when discretion and functionality are required. A series of technical devices make them unique on the market, while the series filtration system returns pure air to the environment.

Technical data

ModelDRYVER 15 R
TypeDry
Motor n.1
Max power700/800 W
Voltage – Frequency230/240 V – 50/60 Hz
Air flow36 l/s
Vacuum210 mBar
Capacity15 Lt
Gross weight10 Kg

Kit Dry Ø 32 mm

DRYVER 10 RE

Vacuum cleaners with excellent performances; powerful when situations require it, delicate but efficient when discretion and functionality are required. A series of technical devices make them unique on the market, while the series filtration system returns pure air to the environment.

Technical data

ModelDRYVER 10 RE
TypeDry
Motor n.1
Max power700/800 W
Voltage – Frequency230/240 V – 50/60 Hz
Air flow36 l/s
Vacuum210 mBar
Capacity10 Lt
Gross weight11 Kg

Kit Dry Ø 32 mm

DRYVER 10 R

Vacuum cleaners with excellent performances; powerful when situations require it, delicate but efficient when discretion and functionality are required. A series of technical devices make them unique on the market, while the series filtration system returns pure air to the environment.

Technical data

ModelDRYVER 10 R
TypeDry
Motor n.1
Max power700/800 W
Voltage – Frequency230/240 V – 50/60 Hz
Air flow36 l/s
Vacuum210 mBar
Capacity10 Lt
Gross weight10 Kg

Kit Dry Ø 32 mm

Tytan Disc

Carbide metal disc, double-sided, high performance, high wear-resistant abrasive lasts up to 150 times longer than sand paper and much more effective and time-saving.

Suitable for removing a wide range of coatings on concrete, wooden and other surfaces.

To be used with holder disc for sand paper.

Technical data

Suitable forPaint, Cement, Plaster, Linoleum, Filler, Acrylic, Fiberglass, Carpet backing, PVC, Concrete, Epoxy, Marble, Carpet felt, Wood and more
Diameter430 mm – 17″
double-sided grit with 8 slices attachment (ø 25 mm)
Standard Grit6 – 10 – 14 – 24 – 36 – 60 – 80

Abrasive Brushes Ø 240mm

Abrasive diamond brushes gives an antique old-look effect on marble and natural stone floors.

Can be used with marble, ceramic tiles, granite and concrete floors.

Use wet or dry.
(for heavy machines we recommend to use grits from 24 to 46).

Technical data

Diameter240 mm – 9,5″
Grit24 – 36 – 46 – 60 – 80 – 120 – 240 – 320 – 500
ConnectionVelcro connection

INOX

Robust and technological – An aspirator with excellent performance; in addition to the features of the Plus model, it offers extraordinary strength. In addition to a powerful engine, it has a three-stage filtration system that returns purified air to the environment. It can accommodate a 13-liter bag.

Technical data

ModelINOX
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity15 Lt
Gross weight7,5 Kg

Kit Dry Ø 32 mm

PLUS HC

Power and technology – Powerful (290 mBar), very quiet (61 dB), complete in every detail. In addition to all the advantages of the Standard P model, it has excellent filtration and a practical system for quick replacement of the power cable in case of damage.

Technical data

ModelPLUS HC
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity25 Lt
Gross weight8 Kg

Kit Dry Ø 37 mm

SILENZIO

Versatility and technology – Powerful when situations demand it, delicate but efficient when discretion is required. A series of technical measures allow the operator to control the engine power and the series filtration system returns purified air to the environment. As with all models, absolute HEPA filters can be installed for inlet and outlet air.

Technical data

ModelSILENZIO
TypeDry
Motor n.1
Max power900/500 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity13 Lt
Gross weight7 Kg

Kit Dry Ø 32 mm

PLUS NEW

Power and technology – Powerful (290 mBar), very quiet (61 dB), complete in every detail. In addition to all the advantages of the Standard P model, it has excellent filtration and a practical system for quick replacement of the power cable in case of damage.

Technical data

ModelPLUS NEW
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity13 Lt
Gross weight7 Kg

Kit Dry Ø 37 mm

Small PCD Diamond Traps

For Epoxy Flooring is an excellent choice when removing medium/heavy coatings.

The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes into the thickest of coatings aggressively and follows with a conventional grind all in one pass.

IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get clockwise and counter clockwise PCDs when you order.

PLUS

Power and technology – Powerful (290 mBar), very quiet (61 dB), complete in every detail. In addition to all the advantages of the Standard P model, it has excellent filtration and a practical system for quick replacement of the power cable in case of damage.

Technical data

ModelPLUS
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity13 Lt
Gross weight7 Kg

Kit Dry Ø 37 mm

STANDARD P

Powerful (290 mBar), very quiet (61 dB), complete in every detail. In addition to the 37 mm high-level accessories, it offers one of its pluses a foot switch, an electro-brush socket, an indicator light to signal when the bag is full. The triple filtration system returns purified air to the environment.

Technical data

ModelSTANDARD P
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity13 Lt
Gross weight7 Kg

Kit Dry Ø 37 mm

BASIC NEW

Small and robust – Extremely compact and silent (60 dB), it is the ideal tool to carry out cleaning operations where practicality and silence are the necessary features. Sturdy and with an oversized motor, it allows continuous work over time, without interruptions.

Technical data

ModelBASIC NEW
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity13 Lt
Gross weight7 Kg

Kit Dry Ø 32 mm

BASIC

Small and robust – Extremely compact and silent (60 dB), it is the ideal tool to carry out cleaning operations where practicality and silence are the necessary features. Sturdy and with an oversized motor, it allows continuous work over time, without interruptions.

Technical data

ModelBASIC
TypeDry
Motor n.1
Max power800/900 W
Voltage – Frequency230/240 V – 50/60 Hz
Capacity13 Lt
Gross weight7 Kg

Kit Dry Ø 32 mm

PCD 00S 2 Segments

For coating removal on very abrasive concrete floor. Combination of hard bond and special diamond segments.

Fast and durable grinding, efficient heavy duty removal. Suitable for mastic, self levelling compounds and light coatings.

IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get clockwise and counter clockwise PCDs when you order.

2 PCD + Guide BAR

The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass.

The weight of the machine is partially supported by the large surface area of the diamond segment – this segment limits the PCD’s penetration into the concrete.

The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth.

This configuration provides an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint.

IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get clockwise and counter clockwise PCDs when you order.

TOP P100

Special vacuum cleaners equipped with considerable robustness polyethylene tank. High resistance to chemical agents and impacts. Equipped with an extraction pump with float that can be activated by the operator or automatically when the liquid reaches a certain level. Special filter separates liquids from any solid waste. With a flow rate of 250 Lt/min it enables continuous emptying operations.

Technical data

ModelTOP P100 WD/PE
TypeWet
Barrel materialPhed
Power230/240V 50/60 Hz
Motor – Stages n.1 – 2
Rated power1950 W
Pump water flow250 l/m
Capacity100 Lt
Noise level70 dB

Kit Wet/A Ø 40 mm

PCD 2 Traps + BAR

2 Quarter Round PCD Traps with Single Bar For Removing Epoxy Coating.

The 2 quarter round PCD is an excellent choice when removing medium/heavy coatings.

The design and positioning of the PCD with an aggressive diamond segment acting as a stabilizer and depth guide scrapes the thickest of coatings aggressively and follows with a conventional grind all in one pass.

IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get clockwise and counter clockwise PCDs when you order.

TOP P80

Special vacuum cleaners equipped with considerable robustness polyethylene tank. High resistance to chemical agents and impacts. Equipped with an extraction pump with float that can be activated by the operator or automatically when the liquid reaches a certain level. Special filter separates liquids from any solid waste. With a flow rate of 250 Lt/min it enables continuous emptying operations.

Technical data

ModelTOP P80
TypeWet
Barrel materialPhed
Power230/240V 50/60 Hz
Motor – Stages n.1 – 2
Rated power1950 W
Pump water flow250 l/m
Capacity80 Lt
Noise level70 dB

Kit Wet/A Ø 40 mm

QUICK A27

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK A27
TypeWet&Dry
Motor n.1
Max Power1200/1400 W
Capacity35 Lt
Gross weight15 Kg

Quick clean system.

Kit Wet&Dry Ø 40 mm

QUICK A11

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK A11
TypeWet&Dry
Motor n.1
Max Power1200/1400 W
Capacity22 Lt
Gross weight13 Kg

Quick clean system.

Kit Wet&Dry Ø 37 mm

QUICK P80

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK P80
TypeWet&Dry
Motor n.1
Max Power1600/1800 W
Capacity80 Lt
Gross weight27 Kg

Quick clean system.

Kit Wet&Dry Ø 40 mm

QUICK P60

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK P60
TypeWet&Dry
Motor n.1
Max Power1200/1400 W
Capacity43 Lt
Gross weight19 Kg

Quick clean system.

Kit Wet&Dry Ø 40 mm

Bush Hammer System

The bush hammers are aggressive tools for concrete profiling and texturing. They create a very rough surface. Ideal for preparation for epoxy, as well as for outdoor applications requiring non-slip surfaces.

Each bush hammer roller is attached to our standard Quick Change trapezoid pad that easily slide in and out the tool holder plate. You can use them on our machines and other grinders using Quick Change adapter plates.

Recommended speed around 700 rpm. Not recommended for use with propane machines. Always attach the security rings for safe operation.

CLICK ON THE IMAGE TO VIEW IN DETAIL
BUSH HAMMER
BUSH HAMMER2

Bush Hammer Plate 3 Rollers

Special tool suitable for many applications: safety anti-slip surfaces on concrete, marble, granite and natural stones.

Technical data

AttachmentQuick attack (with greaser)
Size240 mm / 9,5″
  • Floor preparation, glue, varnish and resin coating removal
  • To break-down thick coating difficult to remove with normal diamond tools
  • Bush Hammer allow to get “face-see effect” “on precast panels”
  • Scarification of any kind of surface
  • Orange-peel skin effect on concrete and any surface

KS TCD Ø100mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal. Very hard bond with special diamond for fast and durable grinding on soft and abrasive concrete.

Technical data

Suitable forVery Abrasive Concrete
Diameter100 mm – 4″   with 4 segments
Grit24 – 36 – 60
ConnectionPlastic support

KS TCD Ø140mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal. Very hard bond with special diamond for fast and durable grinding on soft and abrasive concrete.

Technical data

Suitable forVery Abrasive Concrete
Diameter140 mm – 5,5″   with 5 segments
Grit24 – 36 – 60
ConnectionPlastic support

KS TCD Ø200mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal. Very hard bond with special diamond for fast and durable grinding on soft and abrasive concrete.

Technical data

Suitable forVery Abrasive Concrete
Diameter200 mm – 8″   with 6 segments
Grit24 – 36 – 60
ConnectionQuick change

KS TCD Ø240mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal. Very hard bond with special diamond for fast and durable grinding on soft and abrasive concrete.

Technical data

Suitable forVery Abrasive Concrete
Diameter240 mm – 9,5″   with 6 segments
Grit24 – 36 – 60
ConnectionQuick change

KS CAX Ø100mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CAX 8
KS CAX 7

Technical data

Suitable forVery Abrasive Concrete
Diameter100 mm – 4″   with 4 or 5 segments
Grit24 – 36
ConnectionPlastic support

KS CAX Ø140mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CAX 6
KS CAX 5

Technical data

Suitable forVery Abrasive Concrete
Diameter140 mm – 5,5″   with 4 or 5 segments
Grit24 – 36
Connection
Plastic support

KS CAX Ø200mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CAX 4
KS CAX 3

Technical data

Suitable forVery Abrasive Concrete
Diameter200 mm – 8″   with 4 or 6 segments
Grit24 – 36
ConnectionQuick change

KS CAX Ø240mm

METAL BOND DIAMOND TOOLS FOR VERY ABRASIVE CONCRETE

Suitable for floor preparation, floor levelling and coating removal.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CAX 2
KS CAX 1

Technical data

Suitable forVery Abrasive Concrete
Diameter240 mm – 9,5″   with 6 or 12 segments
Grit24 – 36
ConnectionQuick change

KS CA Ø100mm

METAL BOND DIAMOND TOOLS FOR ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CA 8
KS CA 7

Technical data

Suitable forAbrasive Concrete
Diameter100 mm – 4″   with 4 or 5 segments
Grit24 – 36 – 60 – 120
ConnectionPlastic support

KS CA Ø140mm

METAL BOND DIAMOND TOOLS FOR ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CA 6
KS CA 5

Technical data

Suitable forAbrasive Concrete
Diameter140 mm – 5,5″   with 4 or 5 segments
Grit24 – 36 – 60 – 120
ConnectionPlastic support

KS CA Ø200mm

METAL BOND DIAMOND TOOLS FOR ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CA 4
KS CA 3

Technical data

Suitable forAbrasive Concrete
Diameter200 mm – 8″   with 4 or 6 segments
Grit24 – 36 – 60 – 120
ConnectionQuick change

KS CA Ø240mm

METAL BOND DIAMOND TOOLS FOR ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CA 2
KS CA 1

Technical data

Suitable forAbrasive Concrete
Diameter240 mm – 9,5″   with 6 or 12 segments
Grit24 – 36 – 60 – 120
ConnectionQuick change

KS CD Ø240mm

METAL BOND DIAMOND TOOLS FOR HARD CONCRETE

Suitable for floor preparation, coating removal, floor levelling and concrete grinding and polishing.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS CD 1
KS CD 2

Technical data

Suitable forHard Concrete
Diameter240 mm – 9,5″   with 4 or 6 segments
Grit24 – 36 – 60 – 120
ConnectionQuick change

KS CD Ø100mm

METAL BOND DIAMOND TOOLS FOR HARD CONCRETE

Suitable for floor preparation, coating removal, floor levelling and concrete grinding and polishing.

Technical data

Suitable forHard Concrete
Diameter100 mm – 4″   with 4 segments
Grit24 – 36 – 60 – 120
ConnectionPlastic support

KS DA Ø240mm

METAL BOND DIAMOND TOOLS FOR MEDIUM ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

CLICK ON THE IMAGE TO VIEW IN DETAIL
KS DA 1
KS DA 2

Technical data

 Suitable forMedium Abrasive Concrete
 Diameter240 mm – 9,5″   with 6 or 12 segments
 Grit24 – 36 – 60 – 120
ConnectionQuick change

KS DA Ø200mm

METAL BOND DIAMOND TOOLS FOR MEDIUM ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

Technical data

Suitable forMedium Abrasive Concrete
Diameter200 mm – 8″   with 6 segments
Grit24 – 36 – 60 – 120
ConnectionQuick change

KS DA Ø140mm

METAL BOND DIAMOND TOOLS FOR MEDIUM ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

Technical data

Suitable forMedium Abrasive Concrete
Diameter140 mm – 5,5″   with 5 segments
Grit24 – 36 – 60 – 120
ConnectionPlastic support

KS DA Ø100mm

METAL BOND DIAMOND TOOLS FOR MEDIUM ABRASIVE CONCRETE

Suitable for floor preparation, coating removal, floor levelling and floor grinding and polishing.

Technical data

Suitable forMedium Abrasive Concrete
Diameter100 mm – 4″   with 5 segments
Grit24 – 36 – 60 – 120
ConnectionPlastic support

Nato Concrete

Wet and Dry Polishing Pads with wide channels and patented design allow to work on a cleaner surface, ensuring a quality polish.

High quality, long lasting resin bond, can be used with all floor grinding machines with velcro connection.

NATO pads feature a thick 12mm layer of resin and diamonds for extra long life.

Technical data

 Grit50 – 100 – 200 – 400 – 600 – 800 – 1500 – 3000
Sizes80mm/3″ – 100mm/4″
Thickness12 mm

V-harr Quick Change Premium Polishing Pads

V-HARR Pads are the most versatile and popular polishing pads, designed for mechanically restoring and polishing concrete.

Dry use is strongly recommended for concrete applications. V-HARR is also ideal for terrazzo and hard stone floors and will produce remarkable gloss results on black granite when used wet.

V-HARR Grit 1800 (Dry use) is ideal during Trowel Shine System after using Concrete Hard Lithium.

CLICK ON THE IMAGE TO VIEW IN DETAIL
V Harr Quick Change
V Harr Quick Change 2

Technical data

 Grit120 – 220 – 400 – 800 – 1800 – 3500 – BUFF220 – 400 – 800 – 1800 – 3500 – BUFF
 Size230mm/9″335mm/13″

V-HARR Premium Polishing Pads

V-HARR Pads are the most versatile and popular polishing pads, designed for mechanically restoring and polishing concrete.

Dry use is strongly recommended for concrete applications.

V-HARR is also ideal for terrazzo and hard stone floors and will produce remarkable gloss results on black granite when used wet.

V-HARR Grit 1800 (Dry use) is ideal during Trowel Shine System after using Concrete Hard Lithium.

Technical data

 Grit50 – 120 – 220 – 400 – 800 – 1800 – 3500 – BUFF220 – 400 – 800 – 1800 – 3500 – BUFF
 Sizes230mm/9″ – 275mm/10,63″335mm/13″ – 356mm/14″

Waffel Quick Change Polishing Pads

Waffel Polishing Pads features a triple segmented resin ring (3 rows) for use under larger machines.

Suitable for hard concrete applications. Wet&Dry use. Quick change attachment.

Technical data

Grit30 – 50 – 100 – 200 – 400 – 600 – 800 – 1500
Sizes230mm/9″ – 275mm/10,63″ – 356mm/14″
Thickness10 mm

Waffel Polishing Pads

Waffel Polishing Pads features a triple segmented resin ring (3 rows) for use under larger machines.

Suitable for hard concrete applications. Waffel polishing pads are ideal for Trowel Shine Polishing System.

Wet&Dry use. Standard velcro attachment.

Technical data

 Grit30 – 50 – 100 – 200 – 400 – 600 – 800 – 1500 – 3000
 Sizes230mm/9″ – 275mm/10,63″ – 356mm/14″
Thickness10 mm

Calibra Ceramic Pads

Calibra discs are designed for the removal of difficult scratches which are left behind by the metal bond grinding steps.

They are also suitable for floor restoration. These discs are best for hard and medium concrete applications (their life is shorter on soft or abrasive floors).

Can be used wet or dry.

Technical data

Grit30 – 50 – 100 – 200
Size80 mm / 3″
Thickness10 mm

Hd Resin Pads

Designed for heavier grinders (30” and up). Make sure you add weights if you are using them on lighter machines.

Can be used Wet or Dry and are available in 80 mm / 3” and 100 mm / 4” sizes. Velcro connection.

Technical data

Grit30 – 50 – 100 – 200 – 400 – 800 – 1500 – 3000
Sizes80 mm / 3″ – 100 mm / 4″
Thickness8 mm

3-STEP CONCRETE Polishing system

3” pads, featuring a new proprietary resin bond formula and suitable for any type of concrete.

Can be used Wet or Dry on almost any concrete polishing machine, using a velcro plate/tool holder.

The floor should be cut to 120 grit with a metal or hybrid diamond tool and densified, if necessary, before starting with step 1.

Technical data

GritSTEP 1 – STEP 2 – STEP 3
Size80 mm / 3″
Thickness9 mm

PCD Tools

Ideal for coating removal and preparation for epoxy.

PCD’s without metal button or sacrificial bars are very aggressive and designed for thick coating removal. They will leave a very coarse profile on the concrete floor.

A-QC Trapezoid pad with 2 PCD segments and sacrifical bars (or letf rotation).

B-QC Trapezoid pad with 2 PCD segments and a metal button (or letf rotation).

C-QC Trapezoid pad with 2 PCD segments standard (or letf rotation for L30G)

PCD tools WITHOUT Sacrificial bars or Metal Bond Button are the most aggressive style and will leave a very coarse profile on the concrete underneath.

These are suitable for removal of:

  • Thick mastics and glues
  •  ¼” Thick Parking Deck Membranes
  • 30 mils and up Epoxy Coatings
  • Thick Elastomeric Membranes
  • Any coating with silica sand broadcast mixed in

PCD tools WITH Sacrificial bars or Metal Bond Button are designed to remove coating over a surface equal to a troweled surface and will not damage the concrete. The sacrificial bars or the metal button act as a stabilizer and depth guide, and reduce the gauging of the floor caused by the aggressive pcd segments.

These tools are suitable for removal of:

  • Medium to thin mastics or glues
  • Failing epoxy coatings (30 mils or less)

Quick Change Metal Bond Extra Hard

Our Quick Change system features replaceable trapezoid-style pads that easily slide in and out of the machine plates or heads, with no bolting required.

Quick Change tools are offered in separate bonds for soft, medium, hard, super hard and extra hard concrete floors. Concrete with a PSI over 7000 is considered extra hard. We recommend to use White bond.

Technical data

 Suitable forExtra Hard Concrete
Grit30 – 50 – 70 – 120
AvailableOne segment – Two segments

Quick Change Metal Bond Very Hard

Our Quick Change system features replaceable trapezoid-style pads that easily slide in and out of the machine plates or heads, with no bolting required.

Quick Change tools are offered in separate bonds for soft, medium, hard, super hard and extra hard concrete floors. Concrete with a PSI higher than 5500 is considered very hard. We recommend to use Gold bond.

Technical data

Suitable forVery Hard Concrete
Grit30 – 50 – 70 – 120
AvailableOne button – Two buttons – One segment – Two segments

Quick Change Metal Bond Hard

Our Quick Change system features replaceable trapezoid-style pads that easily slide in and out of the machine plates or heads, with no bolting required.

Quick Change tools are offered in separate bonds for soft, medium, hard, super hard and extra hard concrete floors. Concrete with a PSI between 4000 and 5000 is considered hard. We recommend to use Red b

Technical data

Suitable forHard Concrete
Grit14 – 30 – 50 – 70 – 120
AvailableOne button – Two buttons – One segment – Two segments

Quick Change Metal Bond Medium

Our Quick Change system features replaceable trapezoid-style pads that easily slide in and out of the machine plates or heads, with no bolting required.

Quick Change tools are offered in separate bonds for soft, medium, hard, super hard and extra hard concrete floors. Concrete with a PSI between 2500 and 4000 is considered medium. We recommend to use Grey bond.

Technical data

Suitable forMedium Concrete
Grit6 – 14 – 30 – 50 – 70 – 120
AvailableOne button – Two buttons – One segment – Two segments

Quick Change Metal Bond Soft

Our Quick Change system features replaceable trapezoid-style pads that easily slide in and out of the machine plates or heads, with no bolting required.

Quick Change tools are offered in separate bonds for soft, medium, hard, super hard and extra hard concrete floors.

Concrete with a PSI under 2500 is considered soft/abrasive. We recommend to use Yellow bond.

Technical data

Suitable forSoft/Abrasive Concrete
Grit6 – 14 – 30 – 50 – 70 – 120
AvailableOne button – Two buttons – One segment – Two segments

Hyperpad Mamba

HIGH GLOSS POLISHING PAD WITH NATURAL DIAMOND. HYPERPAD MAMBA polishing pad developed by Klinsystem, thanks to its composition with a combination of Natural Diamonds grits 1500 and 3500, allows to clean and polishing the surface getting an extraordinary ultra gloss finish.

Suitable for all kind of polished floors like Concrete, Marble, Granite and Self-leveling Overlay. Also suitable to remove resin diamond tool marks. Large increase of productivity preserving high quality standards. Its flexible design allows continuous polishing even on unlevelled floors.

High performance and long lasting polishing pad, allows to get high glossy finish with less effort and in less time. For optimal processing with your planetary grinding machine, we suggest to use MAMBA after SPEEDY STEP 3 or HYPERPAD STEP 4 as last polishing step, DRY use at maximum speed to clean the surface and increase the shine.

Technical data

Suitable forAll kind of concrete
ApplicationDry
CompositionNatural diamond
ConnectionFloor pad
BondHybrid resin bond grit 1500/3500
Size235 mm 
Size140 mm 
Size100 mm 

Hyperpad Self 4 Step Polishing System

NEW 4 STEP grinding and polishing system developed by Klinsystem which allows drastic reduction of grinding and polishing time and costs.

Suitable for extremely Hard Concrete, Hard Self-leveling Overlay like Mapei UltraTop or similar products, Hard Micro Terrazzo and Terrazzo Overlay. Large increase of productivity preserving high quality standards.

CLICK ON THE IMAGE TO VIEW IN DETAIL
Hyperpad Self
HYPERPAD SELF Macchina
Self Step1
Self Step2
Self Step3
Self Step4

Technical data

Suitable forConcrete Screeds – Hard Self-leveling Overlay
 BondHybrid resin bond
 ConnectionFloor pad
Application Wet&Dry
CompositionNatural diamond
Size235 mm 
STEP 1 and STEP 2 Aggressive cutting designed for very fast and quick first floor grinding and levelling.
 
STEP 3 and STEP 4 Quick polishing process reduced in only 2 steps. SCRATCHES-FREE, high performance grinding and polishing. The flexible design allows continuous cutting even on unlevelled floor keeping always long lasting tools life. Easy Quick Tool Change with floor pad connection. No flaw grinding and no diamond element glazing.

Hyperpad Self 

Allows you to get an excellent level of glossy finish on extremely Hard Concrete, Hard Self-leveling Overlay like Mapei UltraTop or similar products, Hard Terrazzo and Micro Terrazzo Overlay with less resources, with less effort and in less time.

For optimal processing, we suggest to work with low-speed (450/500 rpm) and additional weight. After STEP 4 as last polishing step, we suggest to use HYPERPAD MAMBA (DRY) at maximum speed to clean the surface and increase the shine.

Hyperpad Hard 4 Step Polishing System

NEW 4 STEP grinding and polishing system developed by Klinsystem which allows drastic reduction of grinding and polishing time and costs.

Suitable for Hard and Very Hard Concrete, Terrazzo and Micro Terrazzo Overlay, Granite and Gres floors. Large increase of productivity preserving high quality standards.

CLICK ON THE IMAGE TO VIEW IN DETAIL
Hyperpad Hard
HYPERPAD HARD Macchina
Hard Step1
Hard Step2
Hard Step3
Hard Step4

Technical data

Step1

Step 2

 Suitable forHard and Very Hard Concrete – Granite – Terrazzo and Micro Terrazzo Overlay
Tool thickness14 mm
Size Ø 235 mmwith 6 metal segments
Size Ø 140 mmwith 3 metal segments
Size Ø 100 mmwith 3 metal segments
Application Wet&Dry
BondHybrid metal and resin
CompositionNatural diamond
Connection Floor pad 
STEP 1 and STEP 2 Aggressive tools with Hybrid METAL and RESIN bond designed for very fast and quick first floor grinding and levelling.

Technical data

Step3

Step 4

 Suitable forHard and Very Hard Concrete – Granite – Terrazzo and Micro Terrazzo Overlay
Tool thickness10 mm
Size Ø 235 mmwithout metal segments
Size Ø 140 mmwithout metal segments
Size Ø 100 mmwithout metal segments
Application Wet&Dry
BondHybrid resin bond
CompositionNatural diamond
Connection Floor pad 
STEP 3 and STEP 4 Quick polishing process reduced in only 2 steps. High performance, high cutting and SCRATCHES-FREE grinding also from the first step. The flexible design allows continuous cutting even on unlevelled floor keeping always long lasting tools life. Easy Quick Tool Change with floor pad connection. No flaw grinding and no diamond element glazing.

Hyperpad Hard 4 Step 

Allows you to get an excellent level of glossy finish on any type of floor with less resources, with less effort and in less time.

For optimal processing, we suggest to work with low-speed (450/500 rpm) and additional weight. After STEP 4 as last polishing step, we suggest to use HYPERPAD MAMBA (DRY) at maximum speed to clean the surface and increase the shine.

Hyperpad plus 4 step polishing system

NEW 4 STEP grinding and polishing system developed by Klinsystem, allows drastic reduction of grinding and polishing time and costs.

Suitable for Soft and Abrasive Concrete, Marble and Terrazzo floors. Large increase of productivity preserving high quality standards.

CLICK ON THE IMAGE TO VIEW IN DETAIL
Hyperpad Plus
HYPERPAD PLUS Macchina
Plus Step1
Plus Step2
Plus Step3
Plus Step4

Technical data

Step1

Step 2

 Suitable forSoft Concrete – Marble – Terrazzo
Tool thickness14 mm
Size Ø 235 mmwith 9 metal segments
Size Ø 140 mmwith 3 metal segments
Size Ø 100 mmwith 3 metal segments
ApplicationWet&Dry
BondHybrid metal and resin
CompositionNatural diamond 
Connection Floor pad
STEP 1 and STEP 2 Aggressive tools with Hybrid METAL and RESIN bond designed for very fast and quick first floor grinding and levelling. High performance, high cutting and SCRATCHES-FREE grinding also from the first step.
 

Technical data

Step3

Step 4

 Suitable forSoft Concrete – Marble – Terrazzo
Tool thickness10 mm
Size Ø 235 mmwithout metal segments
Size Ø 140 mmwithout metal segments
Size Ø 100 mmwithout metal segments
ApplicationWet&Dry
BondHybrid resin bond
CompositionNatural diamond 
Connection Floor pad
STEP 3 and STEP 4 Quick polishing process reduced in only 2 steps. The flexible design allows continuous cutting even on unlevelled floor keeping always long lasting tools life. Easy Quick Tool Change with floor pad connection. No flaw grinding and no diamond element grazing.

Hyperpad Plus 4 Step 

Allows you to get an excellent level of glossy finish on any type of floor with less resources, with less effort and in less time. For optimal processing, we suggest to work with low-speed (450/500 rpm) and additional weight.

After STEP 4 as last polishing step, we suggest to use HYPERPAD MAMBA (DRY) at maximum speed, to clean the surface and increase the shine.

QUICK P30

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK P30
TypeWet&Dry
Motor n.1
Max Power1200/1400 W
Capacity25 Lt
Gross weight18 Kg

Quick clean system.

Kit Wet&Dry Ø 37 mm

QUICK P35

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK P35
TypeWet&Dry
Motor n.1
Max Power1600/1800 W
Capacity45 Lt
Gross weight20 Kg

Quick clean system.

Kit Wet&Dry Ø 37 mm

QUICK P25

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK P25
TypeWet&Dry
Motor n.1
Max Power1200/1400 W
Capacity35 Lt
Gross weight15 Kg

Quick clean system.

Kit Wet&Dry Ø 37 mm

QUICK P12

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelQUICK P12
TypeWet&Dry
Motor n.1
Max Power1200/1400 W
Capacity25 Lt
Gross weight13 Kg

Quick clean system.

Kit Wet&Dry Ø 37 mm

A 650.2 WDM S

Professional vacuum cleaners and wet cleaners with the “QUICK CLEAN“ cleaning system to clean perfectly the filter without opening the vacuum. Standard M class filter cartridge fitted inside the head, not in contact with liquids. This allows the operator to work no-stop and suck up solids and liquids.

Technical data

ModelA 650.2 WDM S
TypeWet&Dry
Motor n.2
Max Power2400 W
StagesDouble
Air flow92 l/s
Water lift mm H2O2200
Capacity66,5 Lt

Kit Dry Ø 40 mm

Traditional poly filters washable + cartridge optional.

Front mounted kit squeegee. The front fixed squeegee accessory is also available to easily suck up liquids on large surfaces.

A 650.3 WDM S

Professional vacuum cleaners available with polypropylene or stainless steel tank. Capacity tank from 22 Lt to 66 Lt. 1-2-3 motors. Dry and Wet & Dry versions to meet every cleaning need. Versions available with fixed trolley or market version.

Standard front hose drain kit to facilitate emptying operations for WDM trolley version. The front fixed squeegee accessory is also available to easily suck up liquids on large surfaces. Traditional poly filters washable + cartridge optional.

Technical data

ModelA 650.3 WDM S
TypeWet&Dry
Motor n.3
Max Power3300 W
StagesDouble
Air flow116 l/s
Water lift mm H2O2200
Capacity66,5 Lt

Kit Dry Ø 40 mm

Traditional poly filters washable + cartridge optional.

Front mounted kit squeegee. The front fixed squeegee accessory is also available to easily suck up liquids on large surfaces.