Transforms your dull floors into clean and polished floors. Easy to use with standard single disc machine or with Orbital machines to remove scratches, cleaning and polishing the floors. HYPERSHINE EXTRA is available 7 different grits, can be used for Marble, Terrazzo, Ceramic, Klinker, Natural stone, PVC, Rubber, Vinyl, Epoxy and Wooden floors.HYPERSHINE EXTRA can be used Wet or Dry with any type of floor care machines and auto-scrubber. Using HYPERSHINE EXTRA instead of the traditional Floor Pads, allows to restore and keep the floor shine during the normal cleaning. Only water! HYPERCHINE EXTRA requires no chemical or wax. Using just water reduces the environment and eliminates additional costs.
Grit | 60 – 120 – 220 – 400 – 800 – 1800 – BUFF |
Sizes | 240mm/9,5″ – 330mm/13″ – 430mm/17″ – 510mm/20″ |
*Available also HYPERSHINE EXTRA 5 Grit 5000 and HYPERSHINE EXTRA 6 Grit 12000 Lux
Old wood coating floor restoration
(KP 43 DS DUAL SPEED is recommended)
Start grinding the floor with HYPERSHINE EXTRA grit 1 or 2 according the condition of the floor then proceed with HYPERSHINE EXTRA grit 3 and 4. Work dry at medium speed of 200 rpm until old marks and imperfection disappear.
Matt finish ceramic, klinker and glazed tiles heavy duty cleaning
(not for polished tiles).
Start scrubbing the floor with HYPERSHINE EXTRA grit 2 according to the condition of the floor, work at low speed of 160 rpm. Work wet with little quantity of water until old marks and dirty will disappear. Proceed with HYPERSHINE EXTRA grit 4 and little quantity of water at low speed. Polish with HYPERSHINE EXTRA grit 5 working at high speed 400 rpm.
Old resin and epoxy coated floor restoration
High speed polishing machine like KP 43 DS DUAL SPEED is recommended. Start scrubbing the floor with HYPERSHINE EXTRA grit 0 or 1 according to the condition of the floor then proceed with HYPERSHINE EXTRA grit 2 and 3. It is always suggested to work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq. Polish with HYPERSHINE EXTRA grit 4 working with little quantity of water at the higher speed of 400 rpm.
Marble and Terrazzo polishing system
Start grinding the floor with HYPERSHINE EXTRA grit 1 and 2 according to the condition of the floor, then proceed with HYPERSHINE EXTRA grit 3 and 4. Use PADLUX floor pad and KS POLISH POWDER with little quantity of water to massage the floor until get the shine.
Linoleum, PVC, Vinyl floor restoration
(High speed polishing machine is recommended)
Start scrubbing the floor with HYPERSHINE EXTRA grit 1 or 2 according to the condition of the floor, then proceed with HYPERSHINE EXTRA grit 3. Work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq. Then polish with HYPERSHINE EXTRA grit 4 and little quantity of water at the higher speed of 400 rpm.
"*" indicates required fields
Copyright© Klinsystem | Via degli Alpini, 7, 65029 Torre De’ Passeri (PE) ITALY
Hi! Contact us on Whatsapp