Has special design useful for treatment of corners on large areas and grinding and polishing of joints.
It as well suits grinding surfaces repaired using repair compounds.
Such machine allows a contractor to carry out the work faster and is used instead of manual processing.
|Concrete grinding||1 Step||40-50 Sqm/h|
|Terrazzo Grinding||1 Step||60-90 Sqm/h|
|Glue removal||1 Step||30-40 Sqm/h|
|Paint removal||1 Step||20-40 Sqm/h|
|Power||4 kW – 5,5 Hp||Tool diameter||335mm / 13″|
|Working Width||335mm||Tool holder diameter||1x335mm / 13″|
|Voltage||230 V – 50/60 Hz||Application||Dry|
|Amperage||Max 16 Amp||Water Tank capacity||No|
|Variable Speed||500 – 800 rpm||Water Pump||No|
Additional controls available, including a forward/reverse option. A new gauge allows the operator to control the angle of the head against the floor,up to 4 degrees in each direction, to blend edge passes.
A level on the head allows the operator to check the flatness of the floor during work. Rollers prevent the head from damaging walls, while allowing for the closest possible access to edges.
"*" indicates required fields
Hi! Contact us on Whatsapp