Three heads planetary machine for grinding and polishing.
Fitted with 7,5 Kw – 10 Hp motor. Ideal for grinding and polishing marble, terrazzo, granite and concrete floors.
Also suitable for floor preparation, bush-hammering and coatings removal.
Powerful machine with total weight of more than 345 kg.
Good choice for professionals, perfect for areas up to 1.000 m2.
|Grinding and Polishing Concrete||7 Step||20-25 Sqm/h|
|Floor Preparation||1 Step||50-100 Sqm/h|
|Polishing Terrazzo||5 Step||20-30 Sqm/h|
|Resin, varnish and coating removal||1 Step||80-120 Sqm/h|
|Grinding and Polishing Marble||5 Step||12-25 Sqm/h|
|Grinding and Polishing Granite||7 Step||8-10 Sqm/h|
|Power||7,5 kW – 10 Hp||Tool diameter||230mm / 9″|
|Working Width||660mm||Tool holder diameter||3x230mm / 9″|
|Voltage||380-400 V – 50 Hz||Application||Wet / Dry|
|Amperage||Max 15 Amp||Water Tank capacity||20 Lt|
|Variable Speed||300 – 1300 rpm||Water Pump||Yes|
New lift points design facilitates moving the machine with a forklift.
Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure.
A detachable led light (with a magnet) improves visibility, and a second led light attached in the back of the machine near the floor helps monitor the scratch pattern
3.15 Amps for faster charging with a shutoff when charge is complete and new durable stainless steel cup holder.
"*" indicates required fields