Three heads planetary machine fitted with 7,5 Kw – 10 Hp motor with new intelligent remote control, with total weight 557 kg.
Suitable for grinding and polishing marble, terrazzo, granite and concrete floors.
Also ideal for floor preparation, bush-hammering and coatings removal.
Machine speed and its rotational speed can be adjusted quickly and easily using the control panel. Very good choice for professionals working on large areas.
Single person is able to operate with the vacuum and the grinder problem-free.
Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure
|Grinding and Polishing Concrete||7 Step||20-25 Sqm/h|
|Floor Preparation||1 Step||50-100 Sqm/h|
|Polishing Terrazzo||5 Step||20-30 Sqm/h|
|Resin, varnish and coating removal||1 Step||80-120 Sqm/h|
|Grinding and Polishing Marble||5 Step||12-25 Sqm/h|
|Grinding and Polishing Granite||7 Step||8-10 Sqm/h|
|Power||7,5 kW – 10 Hp||Tool diameter||230mm / 9″|
|Working Width||660mm||Tool holder diamete||3x230mm / 9″|
|Voltage||380-400 V – 50 Hz||Application||Wet / Dry|
|Amperage||Max 15 Amp||Water Tank capacity||20 Lt|
|Variable Speed||300 – 1300 rpm||Water Pump||Yes|
Precise control over the machine two sensitive thumbsticks control its position and offset, including integrated mapping on the offset. A wide range of functions. Super light and easy to use with ergonomic rubber grip. Rc battery (rechargeable) aa 1,2v
New hmi provides essential operating information and implements operator’s instructions.
The machine is equipped with a special battery system which allows you to move the machine without problems on site without connecting the electric cable. This also simplifies the loading and unloading operations.
The newly designed 3rd wheel facilitates moving the machine. New pins on the wheels allow for moving the machine without using the RC unit.
"*" indicates required fields