Suitable for grinding and polishing Concrete and Natural Stone surfaces on large areas.
Thanks to the forced counter rotating planetary system (820mm) provide a considerable saving of labor and work time.
Equipped with 3-position weight adjustment system to allows to balance the weight of the machine forward or backward to increase or decrease the working pressure. It also facilitates the transport and tilting of the machine for tool change.
Wide pneumatic wheels allow easy maneuverability on the work area, good grip and no marks on the floor.
|Grinding and Polishing Concrete||7 Step||25-30 Sqm/h|
|Floor Preparation||1 Step||100-130 Sqm/h|
|Polishing Terrazzo||5 Step||30-40 Sqm/h|
|Resin, varnish and coating removal||1 Step||100-150 Sqm/h|
|Grinding and Polishing Marble||5 Step||20-30 Sqm/h|
|Grinding and Polishing Granite||7 Step||10-15 Sqm/h|
|Power||15 kW – 20 Hp||Tool diameter||230mm / 9″|
|Working Width||820mm||Tool holder diameter||3x230mm / 9″|
|Voltage||380-400 V – 50 Hz||Application||Wet / Dry|
|Amperage||Max 32 Amp||Water Tank capacity||46 Lt|
|Variable Speed||300 – 1300 rpm||Water Pump||Yes|
Precise control over the machine two sensitive thumbsticks control its position and offset, including integrated mapping on the offset. A wide range of functions. Super light and easy to use with ergonomic rubber grip. RC Battery (rechargeable) AA 1,2V
New HMI provides essential operating information and implements operator instructions:
The machine is equipped with a special battery system which allows you to move the machine without problems on site without connecting the electric cable. This also simplifies the loading and unloading operations
The newly designed 3rd wheel facilitates moving the machine. New pins on the wheels allow for moving the machine without using the RC unit.
"*" indicates required fields